Production Capacity: 8-9 t/h
Power (kw): 380 KW
Cement Ball Mill is the key equipment for grinding after materials are crushed. It is widely used in the grinding of materials and finished products in the cement plant and in grinding of various ores in chemical industry, metallurgy, electricity, cement, refractory, fertilizer, black and non-ferrous metal industries and glass ceramics industry.
The cement ball mill is a horizontal cylindrical rotation device, driven by brim gearwheel. It is composed of the feeding part, supporting part, discharging part, rotating part, transmission part and the lubrication and cooling part. There are two chambers and grid. Materials goes into the first chamber through the feeding port. Inside the first chamber, there are ladder liners or corrugated liners as well as steel balls. The shell rotates to bring balls to a certain height and then balls drop down by gravity. The impact force and the grinding force grinds the materials. After the primary grinding, materials go into the second chamber through the separation screen for secondary grindin. In the second chamber, there are flat liners and steel balls. After the secondary grinding, material is discharged from the discharging port.
Features:
1) Strong suitability and stability
2) Continuous operation, easy to adjust the speed, adjustable fineness, high size reduction ratio
3) Imrpove the production capacity by 15-20% and reduce the energy consumption by 10% compared to the common mill machines
4) The rotary gears are casted and machined by hobbing
5) cast steel hollow shaft, replaceable liners
6) The drum is set with wear-resistant liner, with good wear resistance
> Technical Data
Model (m) |
Production Capacity (t/h) |
Ball Mill Form |
Drive Form |
Power (kw) |
Reducer |
Weight (t) |
Note |
|
Model |
Speed Ratio |
|||||||
2.2*7m |
8-9 |
Open flow |
fringe |
380 |
ZD70 |
5 |
54 |
|
2.2*7.5m |
10-11 |
Open flow |
fringe |
380 |
ZD70 |
5 |
63 |
|
2.2*8m |
10-12 |
Open flow |
fringe |
380 |
ZD70 |
5 |
65 |
|
2.2*9.5m |
14-16 |
Open flow |
fringe |
475 |
ZD70 |
5 |
70 |
|
2.4 *10m |
18-19 |
Open flow |
fringe |
630 |
JR75 |
5.64 |
94.5 |
|
2.4*11m |
19-21 |
Open flow |
fringe |
630 |
RZD80 |
6.3 |
99.2 |
|
2.4*13m |
21-23 |
Open flow |
fringe |
800 |
MBY710 |
7.1 |
115.2 |
|
2.6*13m |
28-32 |
Open flow |
fringe |
1000 |
MBY800 |
7.1 |
148 |
|
2.6*13m |
28-32 |
Open flow |
fringe |
1000 |
MFY100 |
19.5 |
101.73 |
(without motor) |
3*12m |
32-35 |
Open flow |
fringe |
1250 |
MBY900 |
7.1 |
168.6 |
|
3*13m |
34-37 |
Open flow |
fringe |
1400 |
MBY900 |
7.1 |
172.26 |
|
3.2*13m |
45-50 |
Open flow |
fringe |
1600 |
MBY1000 |
7.1 |
196.26 |
|
3.8*13m |
60-62 |
Open flow |
center |
2500 |
MFY250 |
16.5 |
204 |
(without motor) |
4.2*13m |
85-87 |
Open flow |
center |
3530 |
JQS3550 |
16.5 |
254 |
(without motor) |